Feature & Use：
( 1 )For 550MPa high tensile steel，containing Ti and B，so it forms acicular ferrite micro structure, bearing excellent impact toughness.
( 2 )Adapt to Q460E high tensile steel, widely applied to petroleum gas pipeline and coal machinery etc.
1. Please use specialized welding gas, eg: purity of CO2≥99.5%，H2O≤0.005%，Ar≥99.99%. Gas flow: 20~25L/min.
2. Wind affects arc and welding pool, please take steps to block the wind.
3. There is smoke when welding, pay attention to ventilation.
4. Distance between Tip and base steel is about 15mm when current is below 250A; and 20~25mm when current is above 250A.
5. Welding materials should be stored in dry places.
6. Please check the welder ,wire feeder, gas regulator and heater before operation.
7. Please keep the percentage of mixed gas stable and keep gas pressure stay the same.
8. As to thin steel plate, downward welding in the inclined position or forward welding is recommended,(pictures are followed below).
9. Please move plastic spool and basket spool in a correct way.
One chemical composition of deposited metal (wt%)：（CO2）
One mechanical properties of deposited metal：（CO2）
|Yield Strength |
Size & Current (DC+)：
|PA||50 ~ 180||50 ~ 200||50 ~ 220||80 ~ 350||100 ~ 470||200 ~ 500|
|PF||50 ~ 100||50 ~ 140||50 ~ 140||50 ~ 140||100 ~ 180||—|
|PE||50 ~ 100||50 ~ 120||50 ~ 120||50 ~ 160||—||—|
|PG||50 ~ 100||50 ~ 200||—||—||—||—|